Front And Rear Panel Layout - Samson S Class Owner's Manual

S amp Front and Rear Panel Layout
Front Panel Layout
1 LEVEL 1 - Control knob used to
adjust the output level of
Headphone 1.
LEVEL 2 - Control knob used to
2
adjust the output level of
Headphone 2.
Rear Panel Layout
DC POWER INPUT- Connect the supplied
A
power adapter here.
B POWER LED - Red LED will illuminate
when power is on indicating the S amp
is ready for operation.
C HEADPHONE 1 - 1/4" output for connect-
ing headphone 1.
2
1 3
A B C D
8
4
5
3 LEVEL 3 - Control knob used to
adjust the output level of
Headphone 3.
4 LEVEL 4 - Control knob used to
adjust the output level of
Headphone 4.
5 STEREO INPUT - 1/4-inch TRS (TIP/
RING/SLEEVE) connector to input
main stereo signal.
E F
D HEADPHONE 2 - 1/4" output for con-
necting headphone 2.
HEADPHONE 3 - 1/4" output for con-
E
necting headphone 3.
F HEADPHONE 4 - 1/4" output for con-
necting headphone 4.
4