Table of Contents
Advertisement
Optelec
The default setting is 6500 Kelvin. The change this, follow these steps:
-
Select the channel of which you would like to change the color temperature by
pressing the channel A or channel B button;
-
Activate the menu by pressing the menu button;
-
Select Color by using the up and down cursor keys and activate the option by
pressing the A/B button;
-
In the submenu Color, select Color again and confirm the choice with the A/B
button;
-
To adjust the color temperature, use the left and right arrow keys and confirm the
choice with the A/B button;
-
If you selected the custom color setting, the value for red, green and blue can be
adjusted individually;
-
Use the menu Exit or press the Menu button to leave this submenu.
4.4.3. Menu Image
Please note: Optelec recommends not to change the settings in the Image menu. The
TwinView will automatically adjust all image settings when turning on the monitor.
Especially the Audio White Balance setting should not be activated, as that may offset the
color calibration of the TwinView.
The menu Image contains image adjustment settings for the VGA connections. If a PC or
video magnifier is connected using the DVI connection, the Image menu will not be
available and will be greyed out. The first item in the Image menu is Auto Adjust. Activating
this menu item will automatically configure the image settings. As the adjustment will take
place when turning on the TwinView, there is no need to activate this option.
4.4.4. Menu Information
The Information menu displays the screen resolution and frequency.
-
Select the channel of which you would like to view the resolution and frequency by
pressing the channel A or channel B button;
-
Activate the menu by pressing the menu button;
-
Select Information by using the up and down cursor keys and activate the option by
pressing the A/B button;
-
Use the menu Exit or press the Menu button to leave this submenu.
4.4.5. Menu Language
This menu option configures the language setting of the TwinView menu. The menu
language can be changed individually for channel A and channel B. To set the language:
-
Select the channel of which you would like to change the menu language by
pressing the channel A or channel B button;
-
Activate the menu by pressing the menu button;
-
Select Language by using the up and down cursor keys and activate the option by
pressing the A/B button;
-
Select the language of your choice by using the up and down cursor keys and
activate the chosen language by pressing the A/B button;
-
Use the menu Exit or press the Menu button to leave this submenu.
4.4.6. Menu Settings
Use the menu Settings to adjust the menu timeout. This is the time that the TwinView
menu will be displayed on screen when no button is pressed. By default, the menu timeout
is set to 30 seconds. To change the timeout setting:
English
TwinView
11
Advertisement
Table of Contents
