Table of Contents
Advertisement
Optelec
4.
The TwinView Menu Setup
4.1.
Introduction
The TwinView has two menu's: one menu for channel A and one menu for channel B. This
allows you to change all of the settings, such as brightness and contrast, per channel. For
instance, it is possible to increase the brightness and contrast for the PC output (channel
B) and decrease the contrast and brightness for the video magnifier output (channel A).
4.2.
Activating the menu
To activate the menu, first select the channel (A or B) by pressing the A or B button. The A
button can be found to the left of the cursor keys, the B button to the right. Then press the
menu button located to the left of the On / Off switch – this will activate the menu for the
selected channel. All menu changes will only apply to the selected channel. Pressing the
menu button will close the menu.
4.3.
Navigating the menu
Use the up and down arrows to navigate between the menu items. The A/B button located
in the middle of the cursor cross will activate the menu item or selection.
4.4.
Main Menu Setup
The main menu of the TwinView contains the following menu items:
-
General: to set brightness and contrast settings
-
Color: to adjust the color settings
-
Image: to calibrate the image (this option is only available when the input is set to
VGA)
-
Information: to display the resolution and frequency
-
Language: to select the preferred menu language
-
Settings: to configure the menu timeout
-
Factory defaults: to restore all settings to the factory default
-
Select DVI/VGA: to set the DVI or VGA port for the selected channel
-
Exit: to leave the menu
4.4.1. Menu General
The menu General contains the submenu's Brightness and Contrast. The default value of
both Brightness and Contrast is 50%. To configure the brightness and contrast settings of
the TwinView:
-
Select the channel of which you would like to change the brightness and contrast
settings by pressing the channel A or channel B button;
-
Activate the menu by pressing the menu button;
-
Select General by using the up and down cursor keys and activate the option by
pressing the A/B button;
-
Select Brightness or Contrast and confirm the choice with the A/B button;
-
To adjust the brightness and contrast, use the left and right arrow keys and confirm
the choice with the A/B button;
-
Use the menu Exit or press the Menu button to leave this submenu.
4.4.2. Menu Color
The color temperature can be adjusted using the submenu Color. There are three settings
in this menu:
-
6500 Kelvin
-
9300 Kelvin
-
Custom
10
TwinView
English
Advertisement
Table of Contents
