Download Print this page

Menu Factory Defaults; Menu Select Dvi/Vga; Menu Exit - Optelec TwinView User Manual

24 inch

Table of Contents

Optelec

Select the channel of which you would like to change the timeout settings by

pressing the channel A or channel B button;

Activate the menu by pressing the menu button;

Select Settings by using the up and down cursor keys and activate the option by

pressing the A/B button;

Select menu Timeout by using the up and down cursor keys and activate the

chosen option by pressing the A/B button;

Use the left and right arrow keys to adjust the Timeout value;

Use the menu Exit or press the Menu button to leave this submenu.

4.4.7. Menu Factory Defaults

Activating this menu will restore the TwinView settings to the factory defaults for the

selected channel:

Select the channel of which you would like to restore the factory default settings by

pressing the channel A or channel B button;

Activate the menu by pressing the menu button;

Select Factory Defaults by using the up and down cursor keys and activate the

option by pressing the A/B button;

The settings will now be restored to the factory defaults;

Use the menu Exit or press the Menu button to leave this submenu.

Select the DVI or VGA port of the selected channel to which a ClearView C (or other video

magnifier) or PC has been connected. By default, the VGA port is selected. To select a

port:

Select channel A or B by pressing the channel A or channel B button;

Activate the menu by pressing the menu button;

Select DVI/VGA by using the up and down cursor keys and activate the option by

pressing the A/B button;

Select DVI or VGA from the submenu by using the up and down cursor keys and

activate the chosen option by pressing the A/B button;

Use the menu Exit or press the Menu button to leave this submenu.

Activating this menu item will exit the menu.

TwinView

English

Table of Contents