Technical Specifications; Application Hints - Ocean Matrix OMX-9040 Manual

When hooking up a complex setup of several devices, you may find
yourself in a maze of wires, which is difficult to manage, cumbersome and
possibly dangerous. The OMX-9040 3x1 Video Switcher offers an
innovative solution to many of the problems arising from switching, editing
and signal distribution.
The OMX-9040 3x1 Video Switcher is simple-to-operate , tiny
sized, having three Composite videoinputs and one Composite video output.
The OMX-9040 can be used as:
⌦
Video production studios and video field work, delivering
undiminished quality video switching.
⌦
Video showrooms, shops and CCTV applications.
In the OMX-9040, video signals are switched by means of digital
control pulses during the Vertical Interval.
Operation
$
Connect all inputs to the sources to be switched, taking care to use the
right high quality cables.
$
Connect the output to the acceptor, again use high quality cables.
$
Connect a 12 VDC power supply (wall transformer, car battery,
battery belt etc.) to the DC in socket on the rear panel of the machine.
Check for proper polarity.
$ Turn on all units - sources, acceptor and the OMX-9040 machine by
applying power to it.
$
If there is no video signal connected to input #1, then the OMX-9040
machine operates as an electronic switcher without Vertical Interval
switching.

Application Hints

⌦
In emergency cases, the OMX-9040 may be operated using a 9 Volt
battery as power source which will last for several hours.
⌦
Use a Kramer OMX-7019 to distribute the output of the OMX-9040
up to five acceptors (the OMX-7019 is also 12V DC fed.)
⌦
The Vertical Interval Switching capability of the OMX-9040 allows
to use the unit as an inexpensive backup for a big studio switcher.

Technical Specifications:

3 composite video 1Vpp/75 Ω on BNC type connectors.
INPUTS:
1 composite video, 1 Vpp/75 Ω on a BNC type connector.
OUTPUT:
VIDEO BANDWIDTH: 46 MHz. -3dB.
SWITCHING: Vertical interval.
DIFF. GAIN: 0.58%.
DIFF. PHASE: 0.44 deg.
K-FACTOR: <0.05%.
MAX. VIDEO OUTPUT: 1.5Vpp/75 Ω.
VIDEO S/N RATIO: 75 dB.
CROSSTALK: -50dB.
POWER SOURCE: 12VDC 40mA.
DIMENSIONS: 11.7cm x 6cm x 3.2cm (4.6"x2.4"x1.3", W, D, H.).
WEIGHT: 0.3 Kg. (0.67 Lbs.) approx.
ACCESSORIES: 12VDC power supply.
Please note that if the output signal is disturbed or interrupted by very strong
external electromagnetic interference it should return and stabilize when
such interference ends. If not, turn the power switch off and on again to reset
the machine.