PACKAGE CONTENTS AND DESCRIPTION OF DEVICE Package contents - see illustration 1: 1.1 Fitting device 1.2 Regular neckloop (75 cm) 1.3 Long neckloop (85 cm) 1.4 Docking station 1.5 Micro USB cable 1.6 Bluetooth® adaptor (model: BT adaptor) 1.7 Plugs for the charger The device - see illustration 6: 6.1 Center LED 6.2 Neckloop connectors...
-10°C to +50°C (14°F to 122°F) and < 90% rH. Your device is designed to operate from 5°C (41°F) to 40°C (122°F). For more information about your device, visit: widex.pro. Intended use The device is intended to connect the COMPASS GPS fitting software with a wireless...
SETTING UP THE DEVICE Charging the device - see illustration 2 Connect the docking station to a power outlet and place the fitting device on the docking station. Alternatively, you can connect the docking station to your computer using the micro USB cable. NOTE Let the battery charge up to 100% before using the device for the first time.
USING THE DEVICE Place the hearing aids and the neckloop on your client. Press the push button on the device to turn it on and establish connection to the fit- ting software via Bluetooth. Follow the fitting flow as indicated on your computer. Visual indicators The following table shows the available LEDs and what they mean: Power, battery status, charging and Bluetooth pairing (see illustration 7):...
MAINTENANCE It is important that you keep your device clean and disinfected before use. ● Wipe the device and neckloop with a damp cloth. Do not use any chemicals. ● Do not immerse the device or neckloop in water or any other liquid. ●...
TROUBLESHOOTING Problem Possible cause Solution The device does not work a: The device is not correct- a: Make sure the device is ly connected to your com- correctly connected and puter that the Bluetooth adaptor b: The battery is low is plugged into your PC.
REGULATORY INFORMATION EU Directives Directive 2014/53/EU Hereby, Widex A/S declares that these PRO LINK and BT adaptor are in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The PRO LINK contains radio transmitters operating at: 10.6 MHz, -54 dBµA/m @10 m 2.4 GHz, 2.2 mW EIRP.
Page 10
SYMBOLS Symbols commonly used by Name in medical device labelling (labels/IFU/etc.) Symbol Title/Description Manufacturer The product is produced by the manufacturer whose name and address are stated next to the symbol. If appropriate, the date of manufacture may also be stated. Catalogue number The product’s catalogue (item) number.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications to the equipment not expressly approved by Widex could void the user’s authority to operate the equipment. Industry Canada Statement / Déclaration d’industrie Canada...
Page 12
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Opera- tion is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause...
LICENSE AGREEMENT Apache License (mbed TLS) Version 2.0, January 2004 http://apache.org/licences/ TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION 1. Definitions. "License" shall mean the terms and conditions for use, reproduction, and distribution as defined by Sections 1 through 9 of this document. "Licensor"...
Page 14
Licensor for the purpose of discussing and improving the Work, but excluding com- munication that is conspicuously marked or otherwise designated in writing by the copyright owner as "Not a Contribution." "Contributor" shall mean Licensor and any individual or Legal Entity on behalf of whom a Contribution has been received by Licensor and subsequently incorporated within the Work.
Page 15
bution notices within Derivative Works that You distribute, alongside or as an ad- dendum to the NOTICE text from the Work, provided that such additional attribu- tion notices cannot be construed as modifying the License. You may add Your own copyright statement to Your modifications and may pro- vide additional or different license terms and conditions for use, reproduction, or distribution of Your modifications, or for any such Derivative Works as a whole, provided Your use, reproduction, and distribution of the Work otherwise complies...
Need help?
Do you have a question about the PRO LINK and is the answer not in the manual?
Questions and answers