Page 1
PRO LINK INTRODUCTION This quick guide explains the basic functions of the PRO LINK fitting device and how to set up PRO LINK in COMPASS GPS. The quick guide also explains some of the special scenarios/functions that may be relevant in daily use.
Page 2
SETTING UP PRO LINK CHARGING PRO LINK Connect the docking station to a power outlet and place PRO LINK in the docking station. NOTE: Let the battery charge 100% before using PRO LINK for the first time, e.g., overnight. CONNECTING PRO LINK TO A COMPUTER Connect your PRO LINK to your computer using the Bluetooth adaptor by doing as follows: 1.
Page 3
2. In session start, go to ”COMPASS” set-up 3. Click on the tab ”Interface” 4. Choose PRO LINK with Bluetooth adaptor or PRO LINK with micro USB cable, or both, and select ”Add” to move to the current "Interfaces” list 4a.
Page 4
8. When fitting is complete, disconnect from COMPASS GPS 9. Open the neckloop on PRO LINK by removing the neckloop connector from PRO LINK 10. Place PRO LINK in the docking station to ensure it is charged for the next fitting HOW DOES PRO LINK WORK? This section explains the LED indicators available on PRO LINK and what they mean: 1.
Page 5
DOCUMENT VERSION 1.1 Q&A Q: PRO LINK is out of power, and I need it to fit a client Q: My patient is wearing a pacemaker, can I still use PRO with a new hearing aid. What do I do?
Need help?
Do you have a question about the Pro Link and is the answer not in the manual?
Questions and answers