Panasonic WX-CC411 Operating Instructions Manual page 27

■ Clamping the Power Plug and Power Cord
Important:
Surely clamp the power plug to this center module and screw the AC cable to the wall using the
provided AC cable clamper.
1 Insert an AC cable holder into the hole under the AC inlet.
Slide the holder to the backward by pushing down the clamp lever.
2 Insert the power plug into the power cord inlet.
3 Push the holder forward until the holder touches the power plug.
4 Lock the holder
5 Clamp the AC cable with the provided clamp, and secure the AC cable clamper to the wall by
fastening the screws.