Panasonic WX-CC411 Operating Instructions Manual page 21

DAY mode:
When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the
beep A. If the vehicle detector is on of the lane B, you will not hear the beep B.
NIGHT mode:
When you are taking charge of lane A, if the vehicle detector is on the lane A, you will hear the
beep A. If the vehicle detector is on of the lane B, you will hear the low level beep B. When both
vehicle detectors are on, you will alternately hear the beep A and the low level beep B.
Cross Beep:
Sound level of Cross Beep death-6dB Beep sound level, and value is reflected in conjunction
with the Beep volume level change.
When the Day mode is set, the Outside SP Level indicator of the center module will light in yellow. When
the Outside SP Level button is pressed, the Night mode is assumed and this indicator will disappear.
NIGHT mode: 50% level (Attenuation)
Note:
- If POS Remote is set for ON, you have to note that no button operation of the Outside Speaker
Level is possible at the center module.
- Vehicle Detector Normal/Override On
The Vehicle Detector operation can be set up.
Normal/Override On setup can be made by button operation at the front panel of this unit. When the
Override On mode is set, the V/D Override indicator of the center module will light in yellow. When the
V/D Override button is pressed, the Normal mode is assumed and this indicator will disappear.