Advertisement
Use 2pcs ST4x8mm screws to attach lower and upper chimney together, do not
fasten screws too much, make sure upper decorative chimney can be telescopically
adjusted after assembled.
Installation (Vent inside)
NOTE:
Carbon Filter not supplied, these can be purchased as an accessory
If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section "Installation (Vent outside)".
Activated carbon filter can be used to trap odours.
In order to install the activated carbon filter, the grease filter should be detached first.
Press the lock and pull it downward.
16
Upper decorative chimney
(Inner)
Lower Chimney bracket
Lower decorative chimney (Outer)
Hide quick links:
Advertisement
