Subscribe to Our Youtube Channel
Related Manuals for ProsKit MT-7610
Summary of Contents for ProsKit MT-7610
- Page 1 MT-7610 Optical Time Domain Reflectometer USER'S GUIDE English English Test Equipment Depot - 800.517.8431 - 99 Washington Street - Melrose, MA 02176 TestEquipmentDepot.com...
-
Page 2: Warning And Note
WARNING WARNING You are cautioned that changes or modifications not espressly approved in this document could void yout authority to operate this equipment. VISIBLE LASER RADIATION VISIBLE LASER RADIATION INVISIBLE LASER RADIATION INVISIBLE LASER RADIATION AVOD EYE OR SKIN EXPOSURE AVOD EYE OR SKIN EXPOSURE AVOD EYE OR SKIN EXPOSURE AVOD EYE OR SKIN EXPOSURE... -
Page 3: Table Of Contents
Contents 1. Warning and Note 2. Standard 3. Product presentation 3.1 Description 3.2 On/off 3.2 Measurement Interface 3.3 Real-time and average measurement 3.4 Event list 3.5 Real-time measurement tips 3.6 Cursor selection and waveform zoom in/out 3.5 Menu 3.5.1 Menu-File menu 3.5.2 Menu-Measure settings 3.5.3 Menu-System settings 3.5.4 Menu-Module settings... -
Page 4: Standard
Standard Lithium battery Carrying bag Power adapter Power cable USB cable Host(with TF card) -
Page 5: Product Presentation
Description OTDR optic fiber connector VFL optic fiber connector Zoom control button Full screen button Menu button Power button Confirming button Cancel button Real-time measurement button Average measurement button Up button Left button Right button Down button File operation button Cursor select button Power adapter socket Charge indicator... -
Page 6: On/Off
On/off Button is used to turn on/off the device. Keep pressing it for 2 seconds to turn on device. Short press it again to turn off the device. MT-7601 MT-7601 2012-01-01 21:25 Press button to SCAN start measuring. But user should modify measurement setting by real Optical Time Domain Reflectometer ENTER... -
Page 7: Measurement Interface
Measurement Interface 2012-01-01 21:25 Date and time Power 2012-01-01 21:25 40.00 There are 10x10 grids in waveform region. 174622_0001.sor 174622_0001.sor 36.00 A:0.000Km File name 32.00 Horizontal grids mean distance, vertical grids B:0.000Km 28.00 24.00 mean dB value. As shown in figure, 20.00 Waveform region 16.00... -
Page 8: Real-Time And Average Measurement
Real-time and average measurement Real-time measurement can quickly judge basic faults of optical fiber. Press button to start real-time measuring. During measuring, you can change REAL MT-7601 MT-7601 range, zoom in or zoom out . Press button again or button to REAL stop. -
Page 9: Event List
Event list After measurement or open a waveform in memory, there is Dis. Loss Ref. dB/Km C.Loss 0.000 0.00 -28.00 --.-- 0.00 event list on the bottom of waveform interface. Press ENTER Event list on main interface button to show the whole event list. Six types of events as followed: Event List Dis. -
Page 10: Real-Time Measurement Tips
Real-time measurement tips The device supports user to change measurement range during real-time measurement. Start Real-time measuring function and press Up or Down button to MT-7601 MT-7601 increase or decrease the range. And it also supports to change the cursor position and zoom in/out waveform in realtime, which means you can zoom in partial waveform while measuring to judge the network fault. -
Page 11: Cursor Selection And Waveform Zoom In/Out
Cursor selection and waveform zoom in/out This device has two cursors, A and B. 2012-01-01 21:25 40.00 36.00 Default distance is 0m, activated cursor A:0.000Km 32.00 B:0.583Km 28.00 MT-7601 MT-7601 turned to bright red. Press 24.00 Marker 20.00 16.00 button switch to another cursor. Press Left 12.00 8.00 or Right button to move cursor. -
Page 12: Menu
Menu Measure Set. System Set. File Module About Open... There are five pages of menu Format SD Card... File Measure Set. System Set. Module About System Settings which used to configure parameters. 1550 Wavelength Scan Mode Manual File Module About Range Measure Set. -
Page 13: Menu-File Menu
Menu-File menu Measure Set. System Set. File Module Measure Set. System Set. About File Module About Open... Format SD Card... 20140615 2014-06-15 20140617 2014-06-17 20140618 2014-06-18 20140619 2014-06-19 20140622 2014-06-22 Warnning Press key MENU to switch the menu tag. Enter File menu, there are two options, Are you sure to format the SD card? "open"... - Page 14 Menu-File menu Measure Set. System Set. Select "open" option, there are folders. The folder File Module About 20140615 2014-06-15 name is the date of the file saved, which is generated 20140617 2014-06-17 automatically by system. Files measured in the same 20140618 2014-06-18 Measure Set.
- Page 15 Menu-File menu Select one folder to display all files inside. Press Up Measure Set. System Set. File Module About or Down button to select one file and press ENTER button to display it in main interface. The file 133210_0001.sor 2014-06-18 Measure Set.
- Page 16 Menu-File menu When finish measuring an optic fiber, press Save File Name: button to enter storage interface. File 140950 Default filename is hour/minute/second of first time Rename Caps back Save File Name: storage. Press Up/Down/Left/Right button to select 140950 alphabets, digits and symbols on soft keyboard. You Caps back Save...
-
Page 17: Menu-Measure Settings
Menu-Measure settings Measure settings menu is used to set relative measurement data, which Measure Set. System Set. File Module About the judgment of events list is based on. Wrong setting might leads to wrong or Wavelength 1550 missing events. Scan Mode Manual Range Wavelength---wavelength of laser . -
Page 18: Menu-System Settings
Menu-System settings System settings menu is used to set the device's basic functions. File Measure Set. System Set. Module About Auto Power Off--- set time of automatic off or cancel this function. Auto Power Off 10min Auto Name Auto Name---name automatically when file is saving, can cancel this function. -
Page 19: Menu-Module Settings
Menu-Module settings Module settings menu is used to set the Visual Fault Laser, Optical Measure Set. System Set. File Module About Power Meter and wavelength. Close VFL--- cyclically control the red laser Open -- Blink -- Close. OPM( Optional) --- used as an ordinary optical power meter, detect range is from -60dBm to +3dBm, press Enter button to set the OPM Power --.--... -
Page 20: Menu- About
Menu- About This menu is version details about device's configuration of Measure Set. System Set. File Module About hardware and software. CPU number is used to generate upgrading Firmware Version: TEN1A20V35_MAIN_V1.2 TEN1A20V35_ANALOG_V0.3 code, which should inform distributor or factory before software TEN1A20V35_TFT_V1.1 upgrading. -
Page 21: Tf Card And Usb Communication
TF card and USB communication All measured waveforms are stored in TF card. Using mini USB cable can store data to PC. PC will show a new disk icon, data inside. According to filename, user can store or recall files. 2012-01-01 21:25 40.00... -
Page 22: User Upgrading
User upgrading Measure Set. System Set. File Module When device needs upgrading, user does not need to send it About Firmware Version: TEN1A20V35_MAIN_V1.2 back to factory. Prepare materials before upgrading as followed: TEN1A20V35_ANALOG_V0.3 TEN1A20V35_TFT_V1.1 1. CPU ID Software Version: SEN1A20V35_MAIN_V1.2.0 FPGA Version: FEN1A20V35_MAIN_V1.x.0 2. -
Page 23: Charging
Charging This device has lithium batteries inside, and can only use the 2012-01-01 21:25 40.00 power adapter from factory to charge it. Insert the adapter to device, 36.00 A:0.000Km 32.00 B:0.000Km and finish charging in 8-10 hours. Red charge indicator means 28.00 24.00 charging, while green means finish. -
Page 24: Detail Parameters
Detail parameters MT-7610A MT-7610F MT-7610G Optical fiber type SM optical fiber 24dB(1310nm)/22dB(1550nm) Dynamic range Wavelength 1310nm 20nm, 1550nm 20nm Optical fiber connector SC/PC (FC/PC ST/PC Optional) FC/PC (SC/PC ST/PC Optional) Display 3.5 inch color LCD Display resolution 320x240 Distance range (km) 0.37~80 Distance uncertainty (m) (0.8+0.005%*distance+Sampling resolution) - Page 25 Detail parameters MT-7610A MT-7610F MT-7610G VFL power 1mW(650nm 10nm) Connector FC/PC 2.5mm UPP Power Source Lithium Polymer battery 7.4v 3100mAh Battery worktime standby>15hours, mesurement>8 hours Power supply adapter: INPUT AC 100~240 50/60Hz; OUTPUT: DC10.5V/1.9A Plug type Auto power Off Low Battery Warning Low battery energy Operation Voice Prompts Back Light...
Need help?
Do you have a question about the MT-7610 and is the answer not in the manual?
Questions and answers