Filtering; Painting Of The Motor - Danfoss OMS Instruction

User Manual
ATEX instruction for OMS, OMT and OMV
Technical information

Filtering

Painting of the motor

© Danfoss | September 2016
Fluid viscosity limits
Conditions
Minimum
Continuous
Maximum
We recommend the use of an oil type having a viscosity of 35 mm
It is necessary to keep the level of oil contamination at an acceptable level to ensure problem-free
operation. The recommended maximum level of contamination in systems with Danfoss hydraulic orbital
motors is 22/20/16 (ISO 4406-1999).
W
Warning
Danfoss ATEX certified motors are without painting. In case of additional painting of the motor please
make sure that the thickness is in accordance with the relevant standards.
2
mm /s (cSt)
12
20 - 80
1500
SUS
66
98 - 370
6950
2
/s at the actual operating temperature.
11160602 | AQ00000213en-US0103 | 11