Siemens FDA241 Technical Manual page 95

2
1
Connecting the aspirating smoke detector to a PC
Building Technologies
Fire Safety
3
1 Aspirating smoke detector
2 Screw connection between housing cover and back box
3 Slide housing cover
Disconnecting connection between aspirating smoke detector and
PC
 The PC is connected to the aspirating smoke detector and the software is
activated.
 Changed settings and data are saved.
1. Close the software in the 'File' main menu with the 'Exit' command.
2. Remove the connection cable (5) from the aspirating smoke detector (1).
3. Slide the housing cover in the opposite direction to the arrow (3) and back into
its starting position.
 The housing of the aspirating smoke detector (1) is closed.
Maintenance / Repair
Status queries with service devices
4
4 Mini USB interface
5 Connection cable
A6V10334410_h_en_--
8
5
95
2015-09-29