Foscam FosBaby Quick Installation Manual

1
Package Contents
Quick Installation Guide
Wireless HD Baby Monitor
Watch strap
FosBaby FosBaby P1
Quick Installation Guide
Security Warning
Please change the password of your camera regularly, and use the
combination of numbers, letters and special characters.
We recommend you to update your camera to the latest firmware
every three months, in order to ensure the safety of your camera and
You can download the QIG in other languages from
http://www.foscam.com/download/QIG.html . have a better product experience.
Please keep the username and password of your camera safe, and do
V2.1
not tell them to others.
2
Installation Notice
FosBaby
Temperature Detection
IP Camera Mounting Bracket
Sensor
FosBaby P1
Power Adapter USB Power Cable Remote Control
(Fosbaby P1 only)
Quick Installation Guide
HD Wireless Baby Monitor
WARNING:
STRANGULATION
Children have STRANGLED HAZARD!
FosBaby FosBaby P1 of the reach of children in cords. Keep this cord out
Do not remove this tag. (more than 3ft(0.9m)away).
Warranty Card Warning Sticker
Remote Control Description:
One Key Alert on
Speaker Volume Up
Speaker Volume Down
Down Control
3
Physical Description
To install the Foscam APP on your smartphone, you can choose either of
the following methods:
Speaker
Scan QR code
Lens
If you have a QR Code APP on your smartphone, scan the code
Wi-Fi Status Light
below.
Power
Micro-SD Card Slot
Soft AP
Temperature Deterction
WPS / Reset
Sensor
Microphone
Warning Sticker
Download from APP store
Wi-Fi & System
Status Light
You can search the term "Foscam" directly on the APP Store or
Lens Micro-SD Card Slot
Google Play Store. Then find the APP that appears with the same
icon as shown above, and install it to your smartphone.
Speaker
Microphone
Soft AP Night Lamp
WPS / Reset
Before you continue, please note:
Power
Make sure your wireless router is enabled DHCP, and connected to
Warning Sticker
internet.
Temperature & Humidity
Make sure your smartphone is connected to your wireless router and
Detection Sensor
located near the camera.
One Key Alert off
Night Lamp
Play/Stop Lullabies
Up Control
Snapshot
Please Note:
Left control
Right Control
If you used snapshot by the remote
control, the default storage path of
snapshot files are FTP server and SD
card.
4
Download APP
1. Connect the camera with power adapter, and wait for a moment,
until the camera plays a sound "Hello, Foscam".
2. Make sure your smartphone is connected to your wireless router.
3. Run the Foscam APP
Cloud account then log in. After the the camera plays the sound
"Ready for WiFi configuration", please follow the steps below to add
your camera.
My Cameras
Foscam
Add New Camera
Tap '+' to add new camera
Note:
If you fail to add your camera to smartphone for several times, press
the "Reset" button on the camera to reset it, and then try again.
Add IP Camera
on your smartphone, register a Foscam
Setup Wizard Scan
Please scan the QR code on Scan the
Tap here your camera to add. Tap here Please put the QR code within the frame. Put the
barcode outside the frame to avoid interference.
QR code
Tap to scan QR Code
Album
Setup Wizard
EZLink EZLink
QR Code UID
NPU5YHSZSADVC59D111ABZZZ
Connect your phone to Wi-Fi and input Wi-Fi The camera will
password for camera to connect.
WLAN:
√
play a sound
doc
Connection succeeded！
Enter your Wi-Fi "Wireless
Tap the camera in the list to
WLAN Password: watch live video.
password. 轻触扫描二维码
Connection
Succeed" .
Tap here
CONNECT