Foscam FosBaby P1 Quick Installation Manual

Quick Installation Guide
Wireless HD Baby Monitor
FosBaby FosBaby P1
V1.9
"Foscam" App download
EQFB0015
1
Package Contents
IP Camera Mounting Bracket Temperature Detection
Sensor
Watch strap
Power Adapter USB Power Cable Remote Control
(Fosbaby P1 only)
Quick Installation Guide
HD Wireless Baby Monitor
WARNING:
FosBaby FosBaby P1 STRANGULATION
HAZARD! Children have STRANGLED
of the reach of children in cords. Keep this cord out
(more than 3ft(0.9m)away).
Do not remove this tag.
"Foscam" App download
Quick Installation Guide
Warranty Card Warning Sticker CD-ROM
Security Warning
Foscam cameras and NVRs require good security practices
to safeguard your privacy. You should regularly change
your camera or NVR password which is 8-10 numbers,
letters, symbols combination.
You should update your camera or NVR regularly. Make
sure your camera or NVR has the latest rmware installed
for your speci c model and better experience.
Hardware Introduction
1.1 Physical Description
FosBaby
Lens
Soft AP
WPS / Reset
Microphone
WPS
Wireless Router
Speaker
Wi-Fi Status Light
Power
Micro-SD Card Slot
Temperature Detection
Power
Sensor
Warning Sticker
FosBaby P1
Lens
Microphone
Soft AP WPS
Wireless Router
WPS / Reset
Speaker
Micro-SD Card Slot
Night Lamp
Wi-Fi & System
Power
Status Light
Warning Sticker
Temperature & Humidity
Detection Sensor
Remote Control Description:
One Key Alert o
One Key Alert on
Night Lamp
Speaker Volume Up
Speaker Volume Down
Play/Stop Lullabies
Up Control
Snapshot
Left control
Right Control
Down Control
Please Note:
If you used snapshot by the remote control, the default storage
path of snapshot les are FTP server and SD card.
Wi-Fi Status Light
Wi-Fi Light Description
O No Wi-Fi connection
Flashing every 0.1 seconds Soft AP takes e ect
Flashing every 0.2 seconds EZLink takes e ect (default)
Flashing every 0.4 seconds WPS is connecting
Slow Flash every 1.0 second Wi-Fi connected
Please Note:
If required, the camera can also be powered using portable
or mobile power sources. We suggest an output of 5V/2A
and a capacity of 5000 mAH. Under ideal conditions
this will provide about 5 hours of use.
We do not recommend the use of a PC or Laptop power
source due to their insu cient current strength. Use of these
power supplies may result in damage or inconsistent
functioning of your camera.
Before you continue, please note:
Make sure your smartphone is located near the camera.
Your smartphone should be connected to the same WiFi
network as your camera.
Please use a wireless connection for Fosbaby series camera.
After the camera is powered, it will play voice prompts
"Ready for WiFi con guration" .
After plugging the Fosbaby P1 to the power supply, the
FosBaby P1 will automatically run, cruise startup (Fosbaby P1
only).