Foscam FosBaby Quick Installation Manual

Quick Installation Guide
HD Wireless Baby Monitor
Watch strap
FosBaby
Quick Installation Guide
V1.2
4. After finishing Soft AP connection, use the web browser of the
terminal to visit http://192.168.1.1:88.
5. Log in to the camera (Default username is admin with no
password) . When logging in for the first time, you need to
change the username and password.
ShenZhen Foscam Intelligent Technology Co., Ltd
www.foscam.com
1
Package Contents
1.1 Physical Description
Temperature Detection
Mounting Bracket
FosBaby
Sensor
Power Line Resource CD
Power Adapter
Notes:
Quick Installation Guide
HD Wireless Baby Monitor
Warning
power for FosBaby. We recommend that you choose the
The wire wrapped the
baby neck may cause
choking. Please keep it
capacity of 5000 mAh mobile power, it can provide power for
1 meter away from
your baby.DO NOT
FosBaby tear this stickers.
about 6.5 hours.
Warning Sticker Warranty Card
that you use PC or laptop to provide prower for FosBaby.
Note:
install the add-on.
6. After logging in, Please go to "Settings" --"Setup Wizard" to set
the basic parameters of FosBaby, such as camera name, camera
time, wireless settings ( The FosBaby connect to your wireless
router: Wireless Network List - enter the password of your wireless
Input the New username,
router ), IP configuration.
New password and
Confirm the password.
Hardware Introduction
1.2 Hardware Installation
Speaker
WPS
Wireless Router
Indicator Light
Power
Micro-SD Card Slot
Temperature Detection
Power
Sensor
LENS
Warning Sticker
Use a fastening watch strap to fasten the camera on a certain
column where the baby can be monitored conveniently.
Soft AP
WPS / Reset
Microphone
The Mobile Power which output current is 2A can provide
Due to the insufficient of current strength, we not recommend
When logging in for the first time, you need to download and
Click Install Click Install
2
Put the camera on the desk Install it on the wall
1. Start FosBaby: power on, the indicator light of FosBaby will
light on, and a short musical tone indicating that the startup
is completed.
2. Press and hold the Soft AP button for three to five seconds.
The indicator begins to twinkle at very high frequency.
3. Use a terminal which could search the wireless WLAN
(desktop, laptop, mobile phone, or pad. This part takes laptop
as an example.) to search for the AP named "
for connection.
Use a watch strap for fastening
Notes:
when you know some knowledge of the network.
router.
7. Please connect your laptop to the router the one your
FosBaby has connected to.
FosBaby Connection
FosBaby_******
"
The last six letters of FosBaby's
MAC ID.
WPS / Reset Soft AP
Soft AP Button
Recommended to select
"Obtain IP Form DHCP".
We recommend you to choose to manually set the IP
It needs about 1 minute to connect FosBaby to your