Russell Hobbs RHRC100A Owner's Manual page 8

Operating Instructions
5. Replace the Stainless Steel Lid.
CAUTION: Do not operate the Automatic Rice Cooker without
replacing the Stainless Steel Lid. Burns or other serious
injury may occur.
6. Plug the Automatic Rice Cooker into a 120V AC
electrical outlet.
Press the Rice Cooking Selector Lever down and the COOK
Light will illuminate. The cooking process begins as soon as the
Light illuminates. The cooking time will depend on the type
and amount of rice being cooked.
7. When the cooking is completed, the Automatic Rice Cooker
will automatically go into the ON/WARM Mode. At this time,
the ON/WARM Light will illuminate.
For best results, let the cooked rice sit for 15 minutes before
stirring or removing. This allows the steam to finish the
cooking process.
8. Mix the rice.
After rice has steamed for 15 minutes, carefully open the Lid
as steam will escape. Use the Rice Paddle provided or any
other non-metal long-handle utensil to scoop and mix the rice
well. Allow all steam to escape.
9. Keep Warm.
When the cooking is completed, the Automatic Rice Cooker
will automatically go into the ON/WARM Mode. At this time,
the ON/WARM Light will illuminate.
If the WARM Mode is not desired, simply unplug the Automatic
Rice Cooker from the wall. Do not touch the Heating Body or
Inner Pot until they have cooled completely.
10. Using oven mitts, carefully remove the Inner Pot from the Rice
Cooker.
11. Allow the Automatic Rice Cooker to cool completely
before cleaning.
12. When the Automatic Rice Cooker is not being used, please
keep it unplugged.
7
(Continued)