Operating Instructions - Russell Hobbs RHRC100A Owner's Manual

Operating Instructions

COOKING RICE
Many varieties of rice can be used, including basmati, wild, black
rice, arborio, risotto, saffron rice, brown, and long grain. We do
not recommend using instant rice with this Rice Cooker.
1. Measure the amount of rice that you would like to cook.
A 180 ml (3/4 cup) Rice Measuring Cup is included with your
Rice Cooker. Filling the cup with rice makes approximately
2-1/4 cups of cooked rice.
NOTE: Make sure that the rice is leveled when the cup is filled. The
Russell Hobbs® 10 Cup Automatic Rice Cooker has the
capacity for 10 Rice Measuring Cups of dry rice.
2. For Best Results...
Pour desired amount of rice into a separate container. Wash
and rinse the rice until the rinse water is clear.*
3. Take the Inner Pot out of the Rice Cooker.
Place the washed rice into the Inner Pot and add appropriate
amount of water. (If you are making 10 cups of dry rice, add
water to the "10" mark in the inside of the Inner Pot.)
4. Replace the Inner Pot back into the Automatic Rice Cooker's
Heating Body.
Rotate it slightly to make sure that it is well seated on the
Heating Plate.
NOTE: Make sure to always wipe down the outer surface of the
Inner Pot. If the Inner Pot is wet when placed into the
Heating Body of the Rice Cooker, this may cause a
cracking noise while the unit heats up. Keep the outer
surface dry to prevent damage to the inner workings of
the appliance.
*For information regarding rinsing rice, please refer to
Cooking Rice General Information Section.
Add water up to
the 10-cup line
6
Use Rice Measuring Cup
provided to measure 10 level
Rice Measuring Cups of rice.
Rinse, if desired.
Add rice to the Inner Pot.