Test - Teo 4101 Installation Instructions Manual

Teo IP Phone 4101 Installation Instructions
T e s t
T e s t
Select this option to test the LCD display or keys.
From the Administration Options menu, select TEST.
( MENU → ADMIN → TEST)
K e y s
K e y s
Select KEYS.
Press each key on the telephone, including the dial pad keys, one at a time.
Press both the top and bottom of the VOLUME key.
A letter should appear in the display for each pressed key.
Three lines of letters or numbers are used to accommodate all keys; the
display will shift up or down to show the last key pressed.
If all keys are operational, the following display will be shown. Press any key
to return to the Test menu.
If any key fails, or to exit before testing all keys, go off-hook with the handset
or unplug the phone.
Page 50
ADMIN>TEST
DISPLAY
PRESS EACH KEY
OFF-HOOK TO EXIT
ABCDEFGHIJKLMNOP
ABCDEFGHIJKLMNOP
123456789*******
****************
KEY TEST PASSED
ANY KEY TO EXIT
13-280135 Rev. K