Advertisement
1
Overview
The Cisco Video Surveillance 252x Series IP Dome models CIVS-IPC-2520V and
CIVS-IPC-2521V are high-resolution, feature-rich IP cameras. They offers wide
dynamic ranges, dual streaming, motion detection, event notification, day/night
operation, power options (Power over Ethernet, AC, or DC), flexible mounting
options, and many other features. They also support external devices that trigger
alarms and respond to alarms, and provide audio input and output.
The 252x Series IP domes are vandal-resistant and are designed to be mounted
indoors. Model CIVS-IPC-2520V includes a clear dome cover and model
CIVS-IPC-2521V includes a smoked dome cover.
2
Package Contents
The Cisco Video Surveillance IP Dome package includes these items:
• This Quick Start Guide
• Regulatory Compliance and Safety Information
• Template for mounting
• Camera
• Conduit case
• Spare gasket (qty. 1)
• Mini cable with BNC adapter
• Y cable for audio input and output
• Black cylindrical snap-on ferrite core (qty. 1)
• White rectangular snap-on ferrite core (qty. 2)
• 0.9 mm Allen wrench for adjusting back focus
• TORX screwdriver for tamper resistant TORX head screws
• 8-32 x 5/16 inch screws (qty. 4)
3
Optional Accessories
The following accessories are available for the 252x Series IP Dome. You can order
these accessories from Cisco or a Cisco partner.
• Bubble, clear, 2500 Series—Cisco part number CIVS-IPCA-1004=
• Bubble, smoked, 2500 Series—Cisco part number CIVS-IPCA-1005=
• Conduit base spare with extra gaskets, 2500 Dome series—CIVS-IPCA-1006=
4
About Installing the IP Dome
Installing the IP dome involves mounting it on a ceiling or wall and connecting it to
power, a network, and optional components.
Options for mounting the 252x Series IP dome include the following:
• Junction box mounting—
You can mount the IP dome onto a pre-installed standard
4 x 4 inch (101.6 x 101.6 mm) junction box
• Conduit case mounting—Use this method
situations where you cannot cut a hole through a surface for cables or where cables
run through a small hole in a surface
• Direct solid surface mounting—
opening in a surface, you can mount the IP dome by attaching its base plate directly
to the surface
The IP dome requires a connection to a network via a
category 5 or higher network cable. If this connection does not provide Power over
Ethernet (PoE), the IP dome also requires a power cable from a 12 VDC or 24 VAC
power adapter. The 12 VDC or 24 VAC source must be isolated from the ground
(floating output).
In addition, you can use the following optional devices with the 252x Series IP dome:
• External speaker
• External microphone
• Up to two external input devices and up to two external output devices
For detailed information about understanding, installing, configuring, operating,
administering, and troubleshooting the IP dome, see Cisco Video Surveillance IP
Camera User Guide, Cisco Video Surveillance 252x Series IP Dome, Models
CIVS-IPC-2520V and CIVS-IPC-2521V. This document is available at
www.cisco.com/go/ipcamera.
5
Technical Support
To request technical assistance, contact the Cisco Technical Assistance Center (TAC)
in one of the following ways:
• Online—http://www.cisco.com/tac/
• E-mail—tac@cisco.com
• Phone—In North America: 800 553-2447
Outside North America: 408 526-7209
with the provided conduit case in
If the cables for the IP dome can pass through an
a shielded twisted pair (STP)
Advertisement
