Pushbuttons; Power On/Off - Fluke 1550C User Manual

1550C/1555
Users Manual

Pushbuttons

Use the pushbuttons to control the Tester, view test results, and scroll
through chosen test results. See Table 4.
Table 4. Pushbuttons
FUNCTION
1 2 3
Item

Power on/off.



Push to go to the Function menu. Push again to
exit the Function menu. To scroll within the Function

menu, use the arrow pushbuttons.
Scrolls through test voltages, stored test results, timer
duration, and changes test tag ID characters. Use to

answer "yes" to prompts.
After a memory location is set,
parameters, test results stored in memory. These

include voltage, capacitance, polarization index,
dielectric absorption ratio, and current.
Use to scroll through test voltages, stored test results,
timer duration, and memory locations. Use to answer

"no" to prompts.
Use for Test Voltage mode to start incrementally setting

the test voltage between 250 V and 10 000 V.
Starts and stops a test. Push and hold for 1 second to

start a test. Push again to stop a test.
6
ENTER TEST
4 5 6 7
Description

displays the test
 
Use and to access these menu items:
1.X Insulation Functions:
1.1 Ramp off (default)
1.2 Ramp on
1.3 DAR T= 01-00
1.4 DAR/PI T= 10-00
1.5 DAR [CN]= 01-00
2 Time limit xx-xx
3 Show results
4 Delete results

Push to make the selection.
Power On/Off

Push to turn on the Tester.
The Tester does a self-check, self-calibration, shows the software
version, and starts in the Test Voltage mode.
In Test Voltage mode, you can:
•
Change test parameters
•
Start an insulation test
•
View stored test results
•
Download test results

Push again to turn off the Tester.