Wiring
3.1
Wiring and block diagrams
This section contains the block diagram of the module and outlines various connection
options.
You can find information on wiring the front connector, creating a cable shield, etc. in the
Wiring section of the system manual S7-1500/ET 200MP
(https://support.industry.siemens.com/cs/ww/en/view/59191792).
You can find additional information on compensating the reference junction temperature in
the function manual Analog value processing
(http://support.automation.siemens.com/WW/view/en/67989094), the structure of a data
record in the section Structure of a data record for dynamic reference temperature
(Page 61).
Note
You may use and combine the different wiring options for all channels.
Abbreviations used
U
+/U
n
M
+/M
n
I
+/I
n
I
+/I
c n
U
Vn
L+
M
M
ANA
14
-
Voltage input channel n (voltage only)
n
-
Measuring input channel n
n
-
Current input channel n (current only)
n
-
Current output for RTD, channel n
c n
Supply voltage at channel n for 2-wire transmitters (2WMT)
Connection for supply voltage
Ground connection
Reference potential of the analog circuit
Analog Input Module AI 4xU/I/RTD/TC ST (6ES7531-7QD00-0AB0)
3
Manual, 09/2016, A5E32366209-AC