Siemens SIMATIC S7-1500 Manual page 12

Product overview
2.1 Properties
Properties
The module has the following technical properties:
● 4 analog inputs
● Resolution 16 bits including sign
● Voltage measurement type can be set per channel
● Current measurement type can be set per channel
● Resistance measurement type can be set for channel 0 and 2
● Resistance thermometer (RTD) measurement type can be set for channel 0 and 2
● Thermocouple (TC) measurement type can be set per channel
● Configurable diagnostics (per channel)
● Hardware interrupt on limit violation can be set per channel (two low and two high limits
per channel)
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware update
Calibration in runtime
Identification data I&M0 to I&M3
Parameter assignment in RUN
Module-internal Shared Input (MSI)
Configurable submodules / submodules
for Shared Device
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
12
Firmware version of
the module
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher
V1.0.0 or higher V13 Update 3 or higher
V1.0.0 or higher V13 Update 3 or higher
Analog Input Module AI 4xU/I/RTD/TC ST (6ES7531-7QD00-0AB0)
Configuration software
STEP 7
(TIA Portal)
V13 or higher with
HSP 0102
V13 or higher with
HSP 0102
V13 or higher with
HSP 0102
V13 or higher with
HSP 0102
(PROFINET IO only)
(PROFINET IO only)
Manual, 09/2016, A5E32366209-AC
GSD file in STEP 7
(TIA Portal) V12 or high-
er, or STEP 7 V5.5 SP3
or higher
X
X
X
X
X
(PROFINET IO only)
X
(PROFINET IO only)