20
PROGRAMMING MODE
PROGRAMMING MODE
: You can check machine information or change setting on "Program setup", "Collect Information Data", "Diagnostic Test".
How to enter "Programming mode"
You can enter programming mode only for Idle state and
pause state.
- OPL Type
1) Push the 90°C MEDICAL & 60°C NORMAL button at the
same time.
2) Push the 75°C HOT button 1 times.
3) Push the START button.
4) Display will show "
- OPL type -
NOTE
• If you turn on the power without connecting meter case for the first time, the machine display "
• The machine will display "PUSH" for OPL type
".
How to use button
You can change Washer vend price, cycle time and Cycle
parameters, etc.
Press Button
90°C MEDICAL
75°C HOT
Move to the mode in the same level (+)
60°C NORMAL
Move to the modes in the same level (-)
START
Description
Move to upper level or
Comes back to Idle State
Enter the selected mode
".