LG F1069FD2S Owner's Manual page 36

36
PROGRAMMING MODE - TEST MODE
5. PASSWORD -
How to change the password.
Entering set up mode.
You will see LqC1
NOTE
• Default password is 1.
If you want to change the password, you should know the present password.
Press the 75°C HOT or the 60°C NORMAL button until
display.
Press the START button.
Press the 75°C HOT button until
Set up the number you want
By pressing 75°C HOT or the 60°C NORMAL button.
For example, If you want to change password number to No5
Press the 75°C HOT button until "
Press the START button, then Password change is done.
is displayed.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
Button
appears in the
appears in the display.
" appears in the display.
Display