nstallation Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
nstallation I Electrical connection I Washing Machine is to be connected to the water mains using new hose-sets and old hose-sets should not be used. I Connecting water supply hose NOTE After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type of faucet for water supply.
nstallation Normal Tap without thread & screw type inlet hose Normal Tap without thread & one touch type inlet hose (Single inlet models)
nstallation Level adjustment Concrete floors • The installation surface must be clean, dry and level. • Install washer on a flat hard floor. Tile floors (Slippery floors) • Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.) ※...
are before washing Before the first washing Caring before washing 1. Care Labels 2. Sorting 3. Caring before loading Combine large and small items in a load. Load large items first. Large items should not be more than half the total wash load. Do not wash single items.
unction Recommended courses according to the laundry type Fabric Type Program Cotton Synthetic Cotton Quick Quick 30 Delicate Hand Wash / Wool Duvet Bulky Baby Care Bio Care Boiling Care ❋ ❋ ❋ ❋ ❋ ❋ ❋ Proper Temp. Option Maximum Load...