4. Rinsing time setup
Entering set up mode.
You will see LqC1
Press the 90°C MEDICAL button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
Press the START button.
Press the 75°C HOT or the 60°C NORMAL button until
display.
Press the START button.
Display previous rinsing time.
Press 75°C HOT(+) or 60°C NORMAL(-) button to select rinse cycle.
(Max 15min, Min 8min)
Press the START button.
The machine sets up the rinsing time, then advances to the next process
automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C NORMAL button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
• OPL type - Push the 90°C MEDICAL button twice.
PROGRAMMING MODE - SETUP MODE
Button
appears in the
appears in the
27
Display