Related Manuals for Pisector P09 series
Summary of Contents for Pisector P09 series
- Page 1 We provide a more secure home life experience. LAN + WiFi + Cellular Smart Alarm System User Manual...
-
Page 3: Table Of Contents
Table of Contents ● Introduction ● Important Notesfor Users ● About Safety ● Requirements ● System Status & User Authorities ● The Outlook ● Quick Setting Up ● Operating by App ● ● Specifications... -
Page 4: Introduction P2
Introduction • Thank you for purchasing the Pisector®Smart Alarm System. Pisectorwill give you a complete control over your home's security and home automation via your smartphone, tablets or web clients. This manual will guide you through the setup procedures and highlight some key features. -
Page 5: About Safety
About Safety • This system does not offer any guarantee of protection against burglary, robbery, theft, or any type of emergency. It is a DIY product and does not come with a traditional monitoring service. However, most of the risks have been considered in our design to make your home safer. •... -
Page 6: System Status & User Authorities
System Status & User Authorities • The Pisector system does not support any wired sensors. The main box communicates with all sensors via wireless RF signal protocols. • Most of the sensors have low-battery warning mechanism., Users would receive notifications before the battery runs out. -
Page 7: The Outlook
The Outlook • Front View • Top View 5V2A Power Adapter Louver SIM Slot RJ45 100M Ethernet LED Indicator STATUS MEANING Normal Status Light ON ARM/DISARM/HOME ARM/SOS Etc. Networking Configure Setting Status Fast Blinking Reseting Updating Low Battery Errors Slow Blinking Networking Errors Other Errors... - Page 8 • Back View Wall Mounting Bracket Wall Mounting Bracket Battery Cover Networking Configure System Reset Power Switch...
-
Page 9: Quick Setting Up
Quick Setting Up • Install the Latest App - Please search Pisector® P09 in App Store or Google Play, or scan the QR code printed on the package to visit the download page directly. • Prepare the Internet Networking - Please ensure the router you are using has already been connected to the Internet with DHCP mode enabled. Pisector supports IPV4 protocol only. - Page 10 • Setting Networking - Hold the Networking Setting Button in the battery cover until the LED indicator starts flashing. Launch the App - [Add a new device]: - [Quick Setup], following the guideline to finish the networking process. (for first time to set up system add a new main base).
-
Page 11: Operating By App
Operating by App • Introducing the Main User Interface User Settings Device List The entry for all account settings. Switch between all main boxes of current user. - Bind Devices Add/Remove main boxes. - Phone/Email/Password etc,. Real-time Status Diagram Here shows the real-time status and the System &... - Page 12 • Arming & Other Operations - Press the buttons listed on the toolbar. - You would hear a feedback sound in App when the operation is done. - It is recommended to add SOS button by customizing the toolbar for convenience.
- Page 13 • Pairing New Accessories Scan QR Code Recommended Tap [Scan QR Code] Code is printed on every accessory. Follow the guideline in App, done.
- Page 14 • Emergency Contacts Settings - All App users would be listed in Emergency Contact list automatically. - Users can add mobile phone numbers in [Other Contacts] list. - For the App users, the [Push Notification] option would be enabled by default, while the [SMS Notification] would be disabled by default.
- Page 15 • Home Arm Settings - When users are at home and only want to keep some sensors working, they could turn to Home Arm status in App. - When users tapping [Home Arm] button at the first time, the system would guide you to setup. Users just need to decide which sensor should work by tapping in App.
- Page 16 • App Settings In this area, users can do following settings: - Change App Language: It supports multi-languages which can be easily switched in App immediately. - Passcode Lock: By enabling this feature, you would be asked to enter the passcode every time when App is activated from the background.
-
Page 17: Faq
Q: When the Internet connection is down, can the system still protect me? 1. We have LAN/WiFi/Cellular for communication. As recommended, LAN is the most reliable tunnel for Internet connection. In case that LAN and WiFi both are off, the cellular network will work as a backup tunnel. 2. -
Page 18: Specifications
Specifications Core Preferences Environmental Working Temp. ARM Cortex-A7 -20°C~60°C Electrical Physical Auxiliary power Installation DC 5V 2A Desktop, Wall Mounted Backup batteries Shell Material Rechargeable Lithium Polymer battery 2200mAh ABS/PC Key Features Stand-by time 8 hours (fully charged) Radio receiver Total input accessories Unlimited Frequency...
Need help?
Do you have a question about the P09 series and is the answer not in the manual?
Questions and answers