Replacing The Aqua Stop Valve - Siemens SE25M575GB series Repair Instructions

6.3

Replacing the Aqua Stop valve

► Open the housing
► Disconnect the inlet hose
► Cut through the electric connecting cables
► Strip the insulation off the cable ends
► Push the shrink-fit hose over the cable
► Connect electric cables to the insulating sleeves (1.)
► After fitting, warm the connectors until the shrinkage process occurs
and the hot-melt adhesive comes out of the ends of the connectors
(2).
► Push the shrink-fit hose over the connectors and also warm until
the shrinkage process is complete (3)
815_58300000003806_ara_en_e.doc – 30.01.12 Seite 38 von 67