Table of Contents
Advertisement
6.11
Replacing the door seal
The new seal must be adjusted prior to installation.
Adjusting the seal
►
Prior to insertion, ensure that the seal lip is pointing
towards the middle of the rinsing tank, otherwise
there will be leaks in the area of the door
►
adjust the length of the seal to the circumference of the container.
►
cut the ends of the seal at an angle 45°.
►
place the seal on the base of the container. (Splash-proof
protection for the lower corners).
►
Press in the seal evenly and without any kinks
815_58300000003806_ara_en_e.doc – 30.01.12
Seite 48 von 67
- Quick Links:
- Diagnosis Aids
Hide quick links:
Advertisement
Table of Contents
