Mechanical Faults - Siemens SE25M575GB series Repair Instructions

7.2

Mechanical faults

Customer complaint Cause
Base seal detached In the case of built-under appliances tension may
cause the base panel to turn upwards.
This reduces the gap between the base panel and
outer door.
Base seal may be sheared off.
815_58300000003806_ara_en_e.doc – 30.01.12
Remedial action
Place two washers (mat. no.: 320156) under the fastening
screws for the base plate.
Base is tilted forwards, gap increases.
Observe installation sequence!
► First attach the outer door
► Then attach the base!
Otherwise, when the outer door is inserted, the
base seal will be bent backwards and may
shear off the first time the door is opened!
Seite 51 von 67