Siemens SE25M575GB series Repair Instructions page 42

Table of Contents

Advertisement

6.6.2
Installation
Before installing the pump, lubricate the seal with washing-up
liquid.
Connect pump to the pump housing
Leaks
Ensure that all 4 locking hooks in the pump housing
are attached
Sluggish or blocked fan impeller
When the pump is changed, the spacer ring attached
to the motor shaft must be transferred to the new
pump
Rotate pump to the left into the pump housing until the catch
engages
Tilt container back into base pan
Screw stainless steel container to the base pan
Screw on base plate and side panels
6.6.3
Removing the slide ring seal
Remove circulation pump
Loosen fan impeller, locking the rotor with a pen or screwdriver
Remove pump housing
Remove slide ring seal
815_58300000003806_ara_en_e.doc – 30.01.12
6.6.4
Installing the slide ring seal
Sluggish or blocked fan impeller
Ensure that the spacer ring is re-attached to the
motor shaft.
Press slide ring seal into the pump housing
Manually rotate fan impeller firmly onto the motor shaft
Attach sealing ring
Install circulation pump
Seite 42 von 67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents