Specifications - AcraDyne AAP1B66400A Operation Manual

ENVIRONMENTAL
Operating Temperature: 0°C to 32°C
Storage Temperature: 0°C to 65°C
Humidity:
 5% to 90% RH, Non-Condensing, for
temperatures 0°C to 40°C
 5% to 60% RH, Non-Condensing, for
temperatures 0°C to 65°C
Maximum Altitude of Operation: 3000m
PHYSICAL
AAP1B666400A AAP1B76950A
Model
High Torque Pneumatic Series
AAP1B66400A
AAP1B66600A
AAP1B66850A
AAP1B76950A
AAP1B771350A
AAP1B772000A
AAP1B772950A
AAP1B885100A
High Torque, High Speed Pneumatic Series
AAP2B76250A(R)
AAP2B76450A(R)
AAP2B76650A(R)
AAP2B76950A(R)
AAP2B771400A(R)
AAP2B772000A(R)
AAP2B773000A(R)
AAP2B785100A(R)
AIR SUPPLY
AIR HOSE SIZE: ½" ID X 3 Meters in Length.
AIR PRESSURE: 20 - 90 PSI air pressure is recommended for the most efficient performance. CAUTION: Never use higher air pressure
to increase the output of the tool. Overloading will drastically shorten the life of all internal parts.
DRY AND CLEAN AIR: Drain daily and install filter at or near the take-off point to prevent trouble from foreign matter.
AIR HOSE AND JOINTS: Use air hose (the shorter, the better), joints, and other fittings of good condition and of proper size to avoid pressure dro p.
LUBRICATION
MAINTENANCE: Clean, inspect and lubricate all ring gears, planet gears and bearings every 100,000 cycles. NOTE: All work must be
performed by a trained and certified AIMCO/AcraDyne repair technician. Replace all worn parts with original AIMCO/AcraDyne parts.
FOR AIR MOTOR: Place three drops of light spindle oil properly through the air inlet daily and at shift change. Always use AIMCO
Motor Oil when lubricating the air motor.
FOR GEARS AND BEARINGS: Supply recommended high-quality grease (e.g. Dow Corning, Moly Kote, BR2 Plus (or equivalents)
properly once every 25,000 cycles and when the tool is overhauled. Over-greasing will cause dull motion or heating.

Specifications

AAP1B772000A
Torque Torque
(Nm) (Ft. lb)
400 300
600 450
850 625
950 700
1350 1000
2000 1475
2950 2175
5100 3775
250 185
450 330
650 480
950 700
1,400 1,000
2,000 1,475
3,000 2,210
4,800 3,540
Sound and Vibration Emissions for AAP1B Series*
Sound Pressure Level: 82 dB(A)
Sound Pressure Level: 93 dB(A)
Sound Level uncertainty: 3 dB(A)
2
Vibration Value: <2.5m/s
Vibration Level Uncertainty: 0.7 m/s
* Sound and vibration emissions tested per ISO 15744 and ISO 28927-2
AAP1B885100A
Speed Weight
(rpm)
70 9.75
50 9.75
36 9.75
37 10.4
22 10.4
14 12.7
9 14.9
7.5
660 10.5
335 10.5
223 10.5
153 10.5
110 14.6
63 14.8
52 15.0
26.5 19.7
4
2
AAP2B771400A
Sq. Drive
(lb) (in)
¾
¾
1
1
1
1
1
23 1-1/2
¾
¾
¾
¾
1
1
1
1-1/2
AAP2B773000AR
Air Consumption
(CFM)
22.9
22.9
22.9
26.3
26.3
26.3
26.3
31.5
46
46
46
46
46
46
46
46