AcraDyne AAP1B66400A Operation Manual page 6

To maximize the effectiveness of this feature:
•
Begin with the AcraDyne HT Series Nutrunner disconnected from the
air supply.
•
Make sure the recessed area around the teeth on the Reaction Bar is
down toward the Gear Box.
•
Install the Reaction Bar.
•
Install the Retaining Ring into the groove of the Gear
Box.
•
Reconnect the AcraDyne HT Series Nutrunner to air
supply.
•
Ensure that workpiece is securely fixed.
THE TOOL HANDLE MUST NOT BE LOCATED AGAINST A SOLID OBJECT DURING
OPERATION OF THE TOOL WITHOUT A REACTION BAR OR REACTION ABSORBING
DEVICE IN USE AND IN GOOD CONDITION. A PINCH POINT CAN EXIST BETWEEN THE
HANDLE AND THE SOLID OBJECT AND WILL RESULT IN DAMAGE TO THE TOOL, SEVERE
INJURY OR DEATH SHOULD PROPER REACTIONS HANDLING PRACTICES NOT BE
OBSERVED.
A complete tool system consists of the following items:
INSTALLING REACTION BAR
AFRL-4HTA Air Hose
Operation
Retaining Ring
Tool
6
Reaction Bar
Gear Box
Reaction Bar
Reaction Bar*
* Application specific