Position Of The Thread Wiper - Pfaff 2438 plusline Instruction Manual

Adjustment
13

Position of the thread wiper

.07.02
13 - 41
Requirement
Seen in the direction of sewing
1. The tip of the thread wiper 5 should be approx. 1 – 1.5 mm to the right of the needle.
2. At its front point of reversal, thread wiper 5 should be approx. 2 mm in front of the
needle.
Fig. 13 - 37
Without twisting it, move holder 1 (screw 2) on the shaft in accordance with
requirement 1.
Turn rod 3 (nut 4) in accordance with requirement 2.
3
4
1
2
5
1 - 1,5 mm
5
2 mm