Position And Height Of The Thread Catcher - Pfaff POWERline 2545 Adjusiment Manual

1

Position and height of the thread catcher

.06.02
Requirement
When the needle bar is positioned at b.d.c. (balance wheel position 180°) the edges of
thread catcher 3 and knife 5 should be fl ush (see arrow).
Fig. 1 - 23
● Press roller lever 1 against control cam 2.
● Adjust thread catcher 3 (screw 4) in accordance with the requirement
www.promelectroavtomat.ru
5
3
127-096
The height of thread catcher 3 is pre-set by the manufacturer and, if necessary,
it can be adjusted with washers under thread catcher 3 on the base of the hook
bearing.
Adjustment
1
4
2
29