Mitsubishi Electric MES3-255C-DM-EN User Manual page 26

* If you are using Windows
launch the configuration software.
(6) Create a new project.
Double-click <Double-click here to create a new project.> in the project management window.
Or
Select <Double-click here to create a new project.> and click Open.
Configure the following settings in the Create New Project window and click OK.
Project name
IP address
Subnet mask
Default gateway
Comment
®
7 and the User Account Control dialog box appears as shown below, Click Yes to
Optional
(Specify a name such as "Factory A" or "Floor B" so that you can recognize it
as a project for EcoWebServer III.)
192.168.10.1
(Specify the factory default IP address.)
255.255.255.0
Left blank
Optional
26