Table of Contents
Advertisement
13. Initialization of Main Unit Memory
The main unit memory requires initialization when you use the product for the first time or when you keep the product
nonenergized for an extended period of time with the battery exhausted or disconnected ("01" blinks on the 7-segment
LED of the server section at startup).
(1) Check that the main unit is turned off.
(2) Install the battery.
(3) Open the front cover on the server section, and set the
MODE/STOP/RUN switch to the "STOP" position.
(4) Turn the main unit on with the MODE/STOP/RUN switch in the
"MODE" position.
(5) After the "MODE" LED lights orange and "00" is displayed on the
7-segment LED, return the MODE/STOP/RUN switch to the "STOP" position.
(6) Turn the RESET/SELECT switch to the "SEL." position 9 times to see "11" on the 7-segment LED.
(7) Turn the MODE/STOP/RUN switch to the "RUN" position. The "RUN" LED blinks and initialization of the main unit
memory starts.
(8) After the "RUN" LED turns off and "00" is displayed on the 7-segment LED, turn the RESET/SELECT switch to the
"RES." position.
(9) Turn the RESET/SELECT switch to the "RES." position to see all the LEDs except the "POWER" LED on the power
supply section turn off, and return the RESET/SELECT switch to the central position.
(10) Formatting of the main unit memory starts. (The "RUN" LED blinks and the "STA." LED blinks green.)
(11) After the "MODE" LED starts blinking green, turn the RESET/SELECT switch to the "RES." position to see all the
LEDs except the "POWER" LED on the power supply section turn off, and return the RESET/SELECT switch to the
central position.
This completes the initialization of the main unit memory. Set up an IP address.(See "8.1 Setting IP address".)
14. Warranty
For technical and non-technical inquiries about the product, contact the nearest Mitsubishi office or dealer.
This document and product have undergone strict quality control and inspection before delivery, but in the unlikely
event that the document or product is defective in manufacture, our company shall provide replacement. Contact the
dealer where you purchased this product. However, this warranty does not apply to the product or document that has
been damaged by acts of God or misapplication.
Our company shall not be liable for any damages arising out of your or third parties' system troubles, legal problems,
misapplication, failures during use, or any other defects.
The product is warranted for a period of less than one (1) year from the date of your purchase or from the date of
delivery to your specified location or within eighteen (18) months from the date of shipment from our factory (from the
month and year of manufacture), whichever is less.
If any of the following applies, however, the cost of repair or replacement shall be charged even during the warranty
period:
(1) Any malfunction arising from misapplication
(2) Any malfunction arising from misoperation
Repair or replacement made after the expiration of the warranty period shall be subject to charges.
The warranty period shall not be renewed after repair.
44
Advertisement
Table of Contents
