Table of Contents
Advertisement
Rosemount 752
P
C
RODUCT
ERTIFICATIONS
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
European Directive Information
The EC declaration of conformity for all applicable European directives for this product can
be found on the Rosemount website at www.rosemount.com. A hard copy may be obtained
by contacting our local sales office.
Electro Magnetic Compatibility (EMC)
EN 61326:2006
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX Directive.
Hazardous Locations Certifications
North American Certifications
Factory Mutual (FM) Approvals
Explosion-proof for Class I, Division 1, Groups B, C, and D;
E5
Dust Ignition-proof for Class II and Class III, Division 1, Groups E, F, and G hazardous
locations;
T5 (-50 °C to 80 °C) conduit seal not required
Enclosure Type 4X
I5/IE Intrinsically Safe for use in Class I, Division 1,
Groups A, B, C, and D; Class II, Division 1,
Groups E, F, and G; Class III, Division 1; Class I, Zone 0
AEx ia IIC T4; when connected in accordance with Rosemount drawing 00752-1010;
Temperature Code T4 (T
Non-incendive for Class I, Division 2, Groups A, B, C, and D.
Enclosure Type 4X
For entity parameters see control drawing 00752-1010.
Canadian Standards Association (CSA) Approvals
Explosion-proof for Class I, Division 1, Groups B, C, D;
E6
Dust Ignition-proof for Class II, Groups E, F, G;
Dust Ignition-proof for Class III
Temperature Code T5, (T
Suitable for Class I, Division 2, Groups A, B, C,D;
Temperature Code T3C (T
Enclosure Type 4X
I6/IF Intrinsically Safe for Class I, Division 1, Groups A, B, C, D when installed in
accordance with Rosemount drawing 00752-1020.
Temperature Code T3C (T
Enclosure Type 4X
6
= 60 °C);
a
= 80 °C)
a
= 40° C)
a
= 40° C)
a
Quick Installation Guide
00825-0100-4377, Rev BA
October 2010
Advertisement
Table of Contents
