Platform Loading - Actavo BoSS SOLO 700 User Manual

www.actavo.com
BoSS SOLO
700
Quantity Schedule
NUMBER OF WORKING PLATFORMS ALLOWED
The MAXIMUM SAFE WORKING LOAD (the combined weight of
the users, tools and materials) that may be placed on the tower
is the total weight less than the self weight of the tower. The
total weight for the towers shown in the schedule is 550kg.

PLATFORM LOADING

On a 1450 tower, a platform may comprise of a single deck or
two decks placed side by side. The maximum safe working load
(the combined weight of the users, tools and materials) that
may be placed on a platform is 275kg. This must be evenly
distributed over either one deck, or two decks placed side by
side.
quantity schedules in this user guide
The
towers to be built safely and therefore comply with the
requirements of the Work at Height Regulations. They include
double guardrails to all platforms. Toeboards will need to be
added if any levels are used as working platforms and for
storage of materials.
EN 1004 requires platforms at least every 4.2m, and these
measures will exceed that requirement. If the tower is to be used
with two people, SP10's stabaliser must be fitted in place of SP4
stabalisers.
FREEPHONE: 0800 214 005
USER GUIDE
will enable BoSS
Quantity Schedule
STABILISERS
Stabalisers shall always be fitted when specified.
To improve stability, larger stabilisers can be used at a
lower level than shown in the quantity schedules.
Attach one stabiliser to each corner of the tower as
shown. Ensure stabiliser feet are equally spaced to
form a square.
SP4 and SP10 telescopic stabilisers must always be
fully extended.
Position the lower clamp so that the
lower arm is as close to horizontal as
possible. Adjust the position of the top
clamp to ensure the stabiliser foot is in
contact with the ground. Ensure clamps
are secure.
When moving the tower, adjust the top clamps or the
telescopic leg, to lift the four stabiliser feet a maximum
of 25mm off the ground and then unlock the castor
brakes. After moving ensure all four stabiliser feet are
repositioned in firm contact with the ground.
Free Standing Tower Against a Wall
PLAN OF PLAN OF
TOWER TOWER
X
X
90°
In a Corner
PLAN OF
TOWER