Table of Contents
Advertisement
www.actavo.com
BoSS SOLO
700
Assembly Procedure
2
Fit the folding toeboard set to the trap door deck.
Position the 1.3m horizontal brace on the front upright,
just above the 4th rung. Place the assembly brackets, one
at each end, on the inside of the folding base unit end
frames.
3
Place the Cam-lock frames, 3 at either end, within the
trolley. Ensure the diagonal struts of the Camlock frames
fit between the arms of the assembly brackets.
FREEPHONE: 0800 214 005
USER GUIDE
Assembly Procedure
4
Place the 1m end frames in the centre of the trolley
between the guardrail frames.
4
Add the final trapdoor deck in front of the 1m end
frames. Fit the 4 SP4 stabilisers in front of the trap
door deck. The trolley unit is now complete.
Advertisement
Table of Contents
