Summary of Contents for Actavo BoSS SOLO 700
- Page 1 BoSS SOLO One Man Aluminium Tower 3T - Through the Trapdoor Method www.actavo.com...
-
Page 2: Safety First
PASMA code of practice. If you need further • Adjustable legs should only be used for levelling. information, design advice, additional guides or any other help with this product, please contact Actavo on 0800 214 005 quoteme@actavo.com email LIFTING OF EQUIPMENT •... -
Page 3: During Use
BoSS SOLO USER GUIDE Safety First Safety First STABILISERS/BALLAST DURING USE • Stabilisers or outriggers and ballast weights should always be • Beware of high winds in exposed, gusty or medium breeze fitted when specified. conditions. We recommend that in wind speeds over 7.7 metres per second (17 mph), cease working on the tower and •... -
Page 4: Maintenance - Storage - Transport
BoSS SOLO USER GUIDE Safety First Safety First TIES • Ties should be used when the tower goes beyond its safe height, beyond the limits of the stabilisers/outriggers or if there is a danger of instability. They should be rigid, two way ties fastened to both uprights of the frame with load-bearing right angled or swivel couplers. -
Page 5: Safety Checklist
BoSS SOLO USER GUIDE Quantity Schedule Safety Checklist Mobile Towers - 3T Method BoSS Solo 700 - 1.3m x 0.7m CHECKLIST 3T Method Internal or external use Ensure all components are present (see quantity Working Height (m) schedule on page 9) -
Page 6: Platform Loading
BoSS SOLO USER GUIDE Quantity Schedule Quantity Schedule NUMBER OF WORKING PLATFORMS ALLOWED STABILISERS The MAXIMUM SAFE WORKING LOAD (the combined weight of the users, tools and materials) that may be placed on the tower is the total weight less than the self weight of the tower. The Stabalisers shall always be fitted when specified. -
Page 7: Assembly Procedure
BoSS SOLO USER GUIDE Assembly Procedure Assembly Procedure To comply with the ‘Work at Height Regulations’ we Release brakes on castors at one end frame until the show assembly procedures with platforms every 2 locks will engage on the rear folding frame. Ensure both metres in height and the locating of guardrails in hinges positively lock into position. - Page 8 BoSS SOLO USER GUIDE Assembly Procedure Assembly Procedure Fit stabilisers to tower before extending telescopic leg. Step 1: Connect two, 4 rung frames together. Check Position top clamp above rung 6, second clamp locates the interlock clips are engaged and add onto the base above rung 2.
- Page 9 BoSS SOLO USER GUIDE Assembly Procedure Assembly Procedure Climb the tower from the inside and from a protected From the ground level, position a trapdoor deck on rung 8. position on the trapdoor, reach to the side bracket and take one Engage the windlocks.
- Page 10 BoSS SOLO USER GUIDE Assembly Procedure Assembly Procedure Add the connected pairs of end frames taking care to engage Place the trapdoor deck onto the 16th rung of the wer and the locking clips. Add a Cam-Lock Guardrail to rungs 13 and engage windlocks.
-
Page 11: Dismantling Procedure
BoSS SOLO USER GUIDE Dismantling Procedure Assembly Procedure Unclip the storage strap from the Folding Toeboard. Set, Simply follow the assembly steps in reverse, ensure unfold and fit the toeboard into position on the working platform. that the 3T method is followed. - Page 12 BoSS SOLO USER GUIDE Assembly Procedure Assembly Procedure Place the 1m end frames in the centre of the trolley Fit the folding toeboard set to the trap door deck. between the guardrail frames. Position the 1.3m horizontal brace on the front upright, just above the 4th rung.
- Page 13 Co. Dublin, Ireland bow.hire@actavo.com Tel: +353 90 18690 galway.hire@actavo.com Hire & Sales Solutions Unit C, Cedar Court Office Park, Denby Dale Road, Calder Grove, Wakefield, West Yorkshire, WF4 3QZ Tel: +44 (0)1924 416000 Fax: +44 (0)1924 366250 Email: quoteme@actavo.com www.actavo.com...