Table of Contents
Advertisement
www.actavo.com
BoSS SOLO
700
Safety First
TIES
•
Ties should be used when the tower goes beyond its safe
height, beyond the limits of the stabilisers/outriggers or if
there is a danger of instability. They should be rigid, two way
ties fastened to both uprights of the frame with load-bearing
right angled or swivel couplers. Only couplers suitable for the
50.8mm diameter tube of the tower should be used. Ideally,
ties should be secured to both faces of a solid structure by
means of anchorages.
•
The tie frequency may vary depending on the application, but
they should (at a minimum) be every 4 metres in height.
•
For further information on tying-in a tower please contact your
supplier or BoSS.
MAINTENANCE - STORAGE -
TRANSPORT
•
All components and their parts should be regularly inspected
to identify damage; particularly to joints. Lost or broken parts
should be replaced, and any tubing with indentation greater
than 5mm should not be used and put to one side for
manufacture repair. Adjustable leg threads should be cleaned
and lightly lubricated to keep them free running.
•
Brace claws, frame interlock clips, trapdoor latches and
platform windlocks should be regularly checked to ensure they
lock correctly.
•
Components should be stored with due care to prevent
damage.
•
Ensure components are not damaged by excessive strapping
forces when transported.
FREEPHONE: 0800 214 005
USER GUIDE
Safety First
Advertisement
Table of Contents
