Actavo BoSS SOLO 700 User Manual page 10

www.actavo.com
BoSS SOLO
Assembly Procedure
10
Add the connected pairs of end frames taking care to engage
the locking clips. Add a Cam-Lock Guardrail to rungs 13 and
15 and lock.
11
Remove the end frame assembly
bracket from rung 10 of the end
frame and re-position on the top Cam-
Lock. Position the folding toe board set
and then the remaining two Cam Lock
frames on the uppermost bracket.
FREEPHONE: 0800 214 005
700
USER GUIDE
Assembly Procedure
12
Place the trapdoor deck onto the 16th rung of the wer and
engage windlocks. Climb the end frame from within and from
the protected trap door position, fit the Cam-Lock Guardrails as
shown.