Page 1
Homeowner: Read "Safe Use" on back cover before using. Save these instructions. Installation must comply with local codes and may require permits. MODEL STEP-1X ABOVE GROUND POOL STEPS ASSEMBLY, INSTALLATION AND USE MANUAL Assembly video available online: www.conferplastics.com WEIGHT LIMIT 400 LBS.
Page 2
CONFER-STEP MODEL # STEP-1X NOTE: FOR INSTALLATION ON FLAT BOTTOM ABOVE GROUND POOLS ONLY. NOT FOR DISHED/ Inpool Steps from Confer Plastics SLOPED BOTTOMS PARTS LIST HARDWARE TOOLS NEEDED FOR ASSEMBLY: MOUNTING BRACKET Description Description • Mallet or hammer and block of wood...
Page 3
Step 4 Step 5 Step 6 Position the Position the second side panel over the steps base under the and risers and press the panel down so that side panel. Secure the Secure each step by fully inserting the base to each side panel each step and riser are fully seated into the second side panel.
Page 4
Enclosure Kit and an additional #Step-1X. If your Confer-Step-1x is attached to a deck: Two people are required for this operation and it is best to remove the unit while the water is still warm enough so that one person can get into the pool.
Need help?
Do you have a question about the STEP-1X and is the answer not in the manual?
Questions and answers