Advertisement
08
REPLACING HN SERIES RIBBON
CARTRIDGE
To replace the ribbon cartridge in your time clock, follow these steps.
Open the top cover and press the button corresponding with column 4 to move the ribbon
cartridge to center.
As shown in the figure below, pull the ribbon holders toward you and, holding them steady
in the position, use the handle to take out the cartridge.
Ribbon Guide
Printer
Head
Handle
Ribbon Holders
Insert a new cartridge between the ribbon guide and the printer head.
Push the cartridge head until it clicks into place. Turn the knob clockwise to fasten the
ribbon.
NOTE: We strongly recommend that you use genuine manufacturer time recorder ribbons.
Using non-genuine or non-compatible ribbons will void your warranty and may damage
your printer.
Knob
29
Advertisement
