Advertisement
SETTING UP YOUR HN SERIES AUTO-ALIGN TIME CLOCK
To access the menu options, remove the cover of the clock using the enclosed key. Then
move the Set switch to the "0" position (to the right).
+
—
Enter
Back/Week
Clear
Mode
Set–/0
Reset
Setup features of the time clock are grouped by menu options. The main menu options
are numbered HN1 through HN5. Each menu has sub-menus called codes, displayed in a
smaller size at the lower left on the clock display.
When a code is flashing, you can make changes using the + and – buttons. Once you select
the desired option, press the Enter button.
To scroll through codes without changing settings, press the Enter button.
The Back button allows you to reset an option that was confirmed incorrectly.
QUESTIONS? Watch our helpful videos at upunch.com/resources
Advertisement
