Advertisement
column shifts (codes 01–12).
This feature is recommended for businesses whose employees often work the same days
and hours. For example, you may have office employees who all work Monday–Friday
from 8:00am–5:00pm and they all take a lunch break from 12:00pm–1:00pm. You would
set up your time clock to punch in four columns: punching in at the beginning of the shift
at 8:00am, punching out for lunch at 12:00pm, punching in from lunch at 1:00pm, and
punching out at the end of the shift at 5:00pm. With these settings in place, an employee
can simply enter the time card and the clock will punch the card in the proper column.
However, if your employees work varying days and hours, such as in a retail store, they
will need to manually press time clock buttons when punching in and out. For more
information, see "Punching Time Cards."
1. Under the HN4 menu, when the code "01" appears, use the + and – buttons to select the
hour for the first punch. For 8:00am, set the hour to 08 and then press Enter to confirm
the setting.
2. Use the + and – buttons to select the minute. For 8:00am, set the minute to 00 and
then press Enter to confirm the setting.
After the time is set, you will set the days of the week.
3. Use the + and – buttons to scroll through the days. A flashing triangle indicates the day
that is currently selected. The + button moves your selection from right to left and the
– button moves your selection from left to right. Press the Back button to toggle each
day on or off.
QUESTIONS? Watch our helpful videos at upunch.com/resources
Advertisement
