Table of Contents
Advertisement
3e–525A–3 Wireless Access Point
WAN
Click the entry on the left hand navigation panel for System Configu-
ration — WAN. This directs you to the System Configuration — WAN
screen.
If not using DHCP to get an IP address, input the static IP information
that the access point requires in order to be managed from the wired
LAN. This will be the IP address, Subnet Mask, Default Gateway, and,
where needed, DNS 1 and 2.
Click Apply to accept changes.
26
Chapter 3: Access Point Configuration
29000167-001 B
Advertisement
Table of Contents
