Table of Contents
Advertisement
3e–525A–3 Wireless Access Point
Utilities exist for scanning for networks and logging all the networks
it runs into—including the real SSIDs, the access point's MAC address,
the best signal-to-noise ratio encountered, and the time the user crossed
into the network's space. These utilities can be used to determine whether
your network is unsecured. Note that, if WEP is enabled, that same WEP
key must also be set on each wireless device that is to become part of the
wireless network, and, if "shared key" is accepted, then each wireless de-
vice must also be coded for "shared key". To use WEP encryption, iden-
tify the level of encryption, the Default WEP key and designate the WEP
keys as shown on the screen.
29000167-001 B
Chapter 3: Access Point Configuration
37
Advertisement
Table of Contents
